b'COREFLUTE ONLY 36 VOID ! - OVERLAP JOINT FIX37WITH NAIL / WASHERPROTECTION BOARD VOID !When applying, cut the edges and corners where necessary. DO NOT BEND aroundTERMINATION BAR corners or changes from vertical to horizontal installations. Adjust the fit to prevent voids. See details below for installation guides: Termination bars are an important step of the installation and should be used on ALL EXTERNAL CORNERS FOOTINGS / INTERNAL CORNERS SHEET JOINTS below-grade Swelltite applications. Allco Termination Bar has been designed and tested to adequately seal the edge of the membrane providing extra confinement pressure where the soil is usually not as compact. The added pressure offered by the bar prevents water BUT JOINT WITHfrom tracking behind the membrane and stops debris from settling in at the back during CUT EDGESTAPE JUNCTION.DO NOT BENDOR. backfill. AROUND CORNERS CUT BACK CORE ADJUST THE FIT TOAND OVERLAPAllco Termination Bar can also be used to finish roof edge terminations.PREVENT VOIDS. FILTER FABRIC FILTER FABRIC TO FACE APPLICATOREXTERNAL CORNERS FOOTINGS / INTERNAL CORNERS SHEET JOINTSCOREFLUTE ONLY VOID ! - OVERLAP JOINT FIX WITH NAIL / WASHERApply bead of Cetseal Round off with finger or toolVOID !EXTERNAL CORNERS FOOTINGS / INTERNAL CORNERS SHEET JOINTSCUT EDGESBUT JOINT WITH DO NOT BENDTAPE JUNCTION.AROUND CORNERS OR.ADJUST THE FIT TOCUT BACK CORE PREVENT VOIDS. AND OVERLAP FILTER FABRIC TOFILTER FABRIC FACE APPLICATORPLEASE REFER TO ALLCOS CAD LIBRARY ON OUR WEBSITE FOR FULL LIST OF DETAILS AND DOWNLOADABLE FILESPLEASE REFER TO ALLCOS CAD LIBRARY ON OUR WEBSITE FOR FULL LIST OF DETAILS AND DOWNLOADABLE FILES EXTERNAL CORNERS FOOTINGS / INTERNAL CORNERS SHEET JOINTSwww.allco.co.nzP 09 448 1185 www.allco.co.nzP 09 448 1185'